Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Product Description and Components
The ReliaGuard gas connector for moveable appliances is composed of a 304 stainless steel
corrugated tubing covered with a tight weave stainless steel braid and outer PVC coating .
Rotational technology fi ttings on both ends of the connector rotate 360 degrees, greatly
reducing stress at both connector ends . The ReliaGuard is CSA certifi ed to ANSI Z21 .69/CSA
6 .16 standard for use with appliances that may or may not utilize casters and, under normal
use, are moved on a regular basis for service, positioning, or area cleanliness .
The ReliaGuard gas connector is available with the following safety-based fi ttings:
• Standard Snap QD: a two-handed quick disconnect fi tting that can be installed at the gas
line or appliance side . The Standard Snap QD includes a thermal shut-off when internal
temperature exceeds 350°F (177°C) .
• SwivelGuard™: a multi-plane rotational device that provides a full 360° range of motion
that can be installed at the gas line, appliance side, or both . The increased range of
motion reduces stress on the connector and allows the connector to be positioned closer
to the wall, providing more kitchen aisle space .
In addition, Dormont provides a Restraining Cable, which prevents the transmission of strain
to the connector . All or some of these components are included in this kit .
A. Gas Supply Line (Gas Manifold)
B. Gas Shutoff Ball Valve
C. ReliaGuard
Gas Connector
®
D. Standard Snap™ Quick Disconnect (QD)
E. 90° Street Elbow
F. Appliance Male Stub-Out
G. Restraining Cable
H. Standard Snap™ Quick Disconnect
Coupling End (Female)
I. Standard Snap™ Quick Disconnect
Nipple (Male)
A
E
B
D
C
F
G
5
Publicité
Table des Matières
