Hudora 72114 Instructions De Montage Et Mode D'emploi page 3

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component
of the product. Therefore, please store them and the packaging carefully in case
questions arise in the future. Please always include these instructions when giving
the product to a third party. This product must be assembled by an adult. This pro-
duct is not designed for industrial use. The use of the product requires certain capa-
bilities and skills. Always adjust according to the age of the user and use for the
purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item: Monkey swing | Board swing |
Board swing | Swing and gymnastics set
Item number: 72114 | 72115 | 72116 | 72118
Max. Height for Suspension: 180 cm | 250 cm | 250 cm | 190 cm
Min. Height for Suspension: 100 cm | 140 cm | 140 cm | 110 cm
Max. Body Weight: 50 kg | 50 kg | 50 kg | 50 kg
Dimension: Ø = 28 cm | 42 x 17 cm | 40 x 16 cm | 45 x 10 cm
Purpose: Device powered by muscle power, for swinging in a
sitting position.
Minimum user age: 3 years
If you have assembly problems or would like further information on the product, we
have all you need and more at http://www.hudora.de/.
CONTENTS
1 x Swing set (72114 or 72115 or 72116 or 72118)
1 x These instructions
Other parts which may be included with the delivery in some circumstances are not
required.
SAFETY INSTRUCTIONS
• WARNING! Only for domestic use. Only suitable in the outdoors area.
• WARNING! Only use under direct supervision of an adult!
• WARNING! Not suitable for children under 36 months. Danger of falling!
• WARNING! Not suitable for children under 36 months due to long cords! Strangu-
lation hazard.
• WARNING! Not suitable for children under 36 months. Small part. Choking Hazard!
• The owners of the swing as well as the competent supervisory personnel are
responsible for ensuring that all users follow the instructions in the operation
manual.
• Do not make any technical modifications.
• Changes to the original product must only be carried out according to manufac-
turer specifications.
• No one is permitted to gain access to the swing area during use.
• Never stand or kneel on the swing.
• Always hold yourself firmly with both hands.
• No objects of any kind must be in the vicinity of the swing zone (trees, walls,
fences, clotheslines).
• Make sure that you have a safety clearance of at least 2 m (front and back) beyond
the maximum reach of the swing and make sure the ground is level and shock
absorbing (e.g. grass) without any sharp edges or pointed objects, obstacles, in-
clines, levels, steps or hard surfaces (e.g. concrete) etc.
• Clearance to stationary components on the side, such as the swing scaffolding,
must be at least 40 cm.
• Maximum raised height must not exceed 250 cm as measured from the ground.
• Swinging components, such as a neighboring swing, must be placed at a distance
of at least 60 cm.
• In idle mode, the swing must be at least 40 cm and maximally 60 cm from the
ground.
• You should never install a swing in such a way that the user could be blinded by
sun rays.
• Suspension connectors shall be of a design that will prevent unintentional discon-
nection.
ASSEMBLY
Prior to installation, carefully select and check the location where you will install the
swing. Please make sure that the swing carrier is adequately stable. Please also take
into account that swinging produces centrifugal forces that can put a lot of strain on
the swing carrier. Please consult an expert (statics expert, architect, carpenter) and
ask how much load your swing carrier can tolerate.
All images are examples of the design.
HANGING DEVICE AND ADJUSTMENT
1 2
The hanging points must be at least as far apart as the swing seat + 100mm. The
swing is packaged with two ropes and adjustment eyelets, so that the height of the
swing can be variably aligned with any suitable hanging device. Before hanging the
swing, please double fold the end of the rope of one of the ropes with the hanging
ring (A) for a length of approximately 20 cm (picture 1) and guide the loop you have
created through the open adjustment eyelet of the other end of the rope (B) of the
same rope (picture 2). Close the eyelet through the loop so that the rope can no
longer be pulled out (picture 3). Repeat this process with the second rope and eyelet
of the swing. The hanging swing can now be individually adjusted. No one should sit
on the swing while making the adjustments. When extending or reducing the length
of the swing ropes please make sure that the ropes remain equally long at all times.
If the lengths of the ropes differ, this will lead to circular pendulum movements of the
swing. Make sure that swing is set up in such a way that the person using the swing
cannot reach the ground with the tips of his or her toes. If in doubt, perform a few
gentle test swings.
MAINTENANCE AND STORAGE
Check the product for damage or traces of wear and tear before and after each use.
We also recommend before each use:
• to check for the firm sitting of nuts and bolts, tighten if necessary
• to lubricate moving parts in order to minimize wear
• to check all covers of screws and sharp edges and replace if necessary
• to replace defective parts according to the manufacturer's instructions
• to check swing seats, chains, ropes and other means of attachments for evidence
of deterioration
You should also replace all the plastic parts after a maximum of 5 years to prevent a
possible failure of these parts. The constant exposure to sunlight can lead to fading
of the color, due to UV light that has however no hazardous safety aspect. If the
product is used outdoors you should dismantle it when it is not in use, especially in
winter, in order to prevent premature fading of the colours and corrosion, and to
extend its service life.
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Store the product in a safe place where it is protected from the elements,
cannot be damaged, and cannot injure anyone. If parts become damaged or if sharp
edges or corners should develop, the product may not be used any more. If in any
doubt, please contact our service team (http://www.hudora.de/service/).
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection point
in your area. Local waste management companies will be able to answer your que-
stions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we put
just as much effort into rectifying them. Therefore, you can find numerous informa-
tion on the product, replacement parts, solutions to problems and lost assembly
manuals at http://www.hudora.de/service.
3 4
3/8