Petsafe Staywell Magnetic 400 Série Guide De L'utilisateur page 4

b) In PVC/uPVC/Metal
aps will NOT WORK if installed directly into a
***
surface containing metal. The unit must be isolated from these
materials in a wooden frame (not provided).
Using the horizontal line as a base, draw a square with minimum
dimensions of 306mm x 306mm (12
dimensions of your wooden frame).
Cut out the square with a jig or keyhole saw. Fit a wooden frame to the
hole with internal dimensions of 175mm x 168mm (6
enclosed cutting template can be used to ensure an accurate cut out.
that is fully isolated from any metal.
FIG.4
Wooden frame
/ " x 12 / "). (This will be the external
1 1
4 4
"). The
/ " x 6 /
3 1
4 2
PVC/uPVC/Metal door
c) In Glass
* It is not possible to cut holes in toughened glass or double glazed
units except at the time of manufacture. Please consult a glazier.
tting a 'Magnetic' model into double glazed glass a plastic
spacer bar must be used. Please consult a glazier.
FIG.5
212mm (8 3 /
d) In Walls
Follow the instructions for "Wood", by using the enclosed cutting template.
Please note that additional tools, materials and competent DIY skills may
be required.
/ ").
3
8
")
8