Introduction / Scope Of Supply - Beha-Amprobe OHMTEST Mode D'emploi

References and symbols marked
on the instrument:
Warning of a potential danger, com-
ply with instruction manual.
Caution! Dangerous voltage. Danger
of electrical shock.
Reference. Please use utmost attenti-
on.
Continuous double or reinforced in-
sulation complies with category II
IEC61140.
Symbol for the marking of electrical
and electronic equipment (WEEE
Directive).
Conformity symbol, the instrument
complies with the valid EU directives.
CAT II
Measurement Category II is applicable to test
and measuring circuits connected directly to
utilization points (socket outlets and similar
points) of the low-voltage Mains installation.
The instruction manual contains infor-
mation and references, necessary for
safe operation and maintenance of the
instrument. Prior to using the instru-
ment (commissioning / assembly) the
user is kindly requested to thoroughly
read the instruction manual and comply
with it in all sections.
Failure to read the instruction manual or
to comply with the warnings and refe-
rences contained herein can result in se-
rious bodily injury or instrument dama-
ge.The respective accident prevention
regulations established by the professio-
nal associations are to be strictly enfor-
ced at all times.

Introduction / Scope of supply

The continuity tester represent a valuable
support for all standard measurement tasks
in handicraft and industrial applications as
well as for household uses.
The Ohmtest is characterized by the follo-
wing features:
• Optic and acoustic continuity and line tes-
ter.
• Voltage protection up to 600 V .
• Robust, ergonomic formed case.
• Robust, high flexible PVC-competing for
lines.
• For the check of electric light bulbs, secu-
rings, wirings and electricity grids.
• Areas of application: Resistor, Semicon-
ductor, Polarity and Capacitor Testing