Direct Playback - Teac CD-P1260 Manuel Du Propriétaire

To suspend playback temporarily
(pause mode)
Press the Play/Pause button (G/J) during playback. Playback
stops at the current position. To resume playback, press the
Play/Pause button (G/J) again.
To stop playbacks
Press the Stop button (H) to stop playback.
Search for a part of a track
During playback, hold down the skip button (. or /)
and release it when the part you want to listen to is found.
10
Listening to CD/MP3 (2)
To skip to the next or a previous track
During playback, press the skip button (. or / )
repeatedly until the desired track is found. The selected track
will be played from the beginning.
In the stop mode, press the skip button (. or / )
repeatedly until the track you want to listen to is found. Press
the Play/Pause button (G/J) to start playback from the
selected track.
< When the . button is pressed during playback, the track
being played will be played from the beginning. To return to
the beginning of the previous track, press the . button
twice.
< During programmed playback, the next or previous track in
the programme is played.

Direct Playback

While in stop or playback mode, you can use the numeric
buttons of the remote control unit to select a track.
Select a track using the numeric buttons, and within 10
seconds press the PLAY/PAUSE button.
Playback starts from the selected track.
For instance, to select track number 35, press "3" and "5".
To play tracks 1 to 9, simply press the corresponding buttons
(1 to 9).
< Direct playback isn't possible during shuffle playback and
programmed playback.