Listening To Cd/Mp3 1; To Stop Playback - Teac SX Mode D'emploi

Listening to CD/MP3 1

3
2
1 4 5
1
Press the CD button to select "CD".
When no disc is set, "NODISC" appears
on the display.
< You can also use the Play/Pause button
(y/J) to select "CD". If a disc is already
installed, playback will start.
2 Press the OPEN/CLOSE mark (L) to
open the disc cover.
3 Put a disc onto the center spindle of
the player with the label side up.
Press the disc onto the spindle until a
slight "click" is heard indicating the disc
is mounted correctly.
18
< Never put more than one disc in the
mechanism at a time.
< Ensure that the disc is correctly mounted
on the spindle and locked in place.
4 Gently close the disc cover by hand.
When closing, press the OPEN/CLOSE
mark (L).
< It takes a few seconds for the unit to
load the disc. No buttons will work
during loading. Wait until the total
number of the tracks is displayed.
When a CD is loaded
total number of
the tracks
total play time of
the disc
When a MP3 disc is loaded
total number of
folders
total number of
the tracks
5 Press the Play/Pause button (y/J) to
start playback.
CD
current track number
elapsed time of
current track
MP3
current folder number
elapsed time of
current track
Playback starts from the first track of the
disc.
< MP3 tracks recorded out of folders are
automatically put in the "01" folder, and
playback starts from the first track of the
01 folder.
< When the playback of all the tracks has
finished, the unit stops automatically.
To suspend playback
temporarily (pause mode)
Press the Play/Pause button (G /J )
during playback. Playback stops at the
current position and the time display
blinks. To resume playback, press the
Play/Pause button (G/J) again.

To stop playback

Press the Stop button (H ) to stop
playback.
19