1
About this document
1.1 Purpose of the document
These Installation Instructions are part of the product and
contain all the information required to ensure correct and
safe installation.
1.2 Using this document
Read these Installation Instructions before installing the
X
X
stand.
Read the Webasto Pure or Live Operating and
X
X
Installation Instructions before installing the stand.
Keep these Installation Instructions at hand.
X
X
Hand these Installation Instructions over to the next
X
X
user/owner.
1.3 Use of symbols and highlighting
DANGER: This signal word denotes a hazard with a
high degree of risk which, if not avoided, will lead to
death or serious injury.
WARNING: This signal word denotes a hazard with
a moderate degree of risk which, if not avoided, may
lead to minor or moderate injury.
CAUTION: This signal word denotes a hazard with a
low degree of risk which, if not avoided, may lead to
minor or moderate injury.
NOTE: This signal word denotes a Special Technical
Feature or (if not observed) potential damage to the
product.
Texts with this symbol refer to separate documents
which are enclosed or can be requested from
Webasto.
Text with this symbol describes an action or require-
ment for the following necessary action.
Text with this symbol describes a necessary action.
Stand Wallbox
1.4 Warranty and liability
Webasto shall not assume liability for defects or damage
that are the result that the installation and operating
instructions as well as the instructions contained therein
being disregarded.
This liability exclusion particularly applies for:
■
■
installation by untrained personnel
■
■
improper use
■
■
repairs not carried out by a Webasto service workshop
■
■
use of non-genuine parts
■
■
conversion of the unit without permission from Webasto
2 Safety
2.1 Intended use
The stand is intended for the mounting of Webasto Pure
and/or Live charging stations in a free space, independent
of wall mounting.
It is not allowed to mount other than Webasto Pure or Live
charging stations.
There are 2 product variations:
1 Mounting of a single Webasto Pure or Live charging
station.
2 Mounting of two Webasto Pure or Live charging sta-
tions.
CAUTION
In case of variation 2 it is not allowed to mount only
one charging station and leave the other position
open.
NOTE
These Installation Instructions consider the installation
of a Variation 2 stand for Webasto Pure charging
stations.
2.2 Qualifications of installation personnel
These installation instructions are meant for certified
and qualified installation personnel with a cor-
responding qualification for working on electro-
technical systems.
2.3 General safety information
The stand for the Webasto Pure or Live charging stations
has been developed, produced, tested and documented
according to the relevant safety and environmental require-
ments and regulations. The device must only be used in a
technically faultless condition.
Have any faults that adversely affect the safety of persons
or of the device rectified immediately by an authorised elec-
trician in accordance with nationally applicable regulations.
WARNING
Hazardous voltages
Severe or mortal injury
Take all the necessary standard precautions for
X
X
working on electrical systems.
CAUTION
Hazard of electric shock, explosion or arc flash
Severe injury or damage to the equipment
Take care of an adequate ground connection of
X
X
the stand that fulfils the local regulations.
NOTE
Always obey local regulations for electrical installa-
tions.
Ensure only persons who have read these Installation
Instructions have access to the stand.
3 Scope of Delivery
The Scope of Delivery consists of:
■
■
Stand
■
■
Click-on cover
■
■
Installation kit, consisting of:
– Screw TX M6 x 25 (2 or 4)
– Screw TX M6 x 50 (2 or 4)
– Screw M8x20
3