Temperature Display; Using The Camera For Other End Devices; Access To The User Account Via The Web Portal (Pc); Useful Information About The Baby Monitor - Inanny NM288 Manuel D'utilisation

10.6.4 Temperature display

Tap the thermometer symbol ( ). The current ambient temperature of the
camera appears.
When you tap again on the thermometer symbol ( ), you can change the
temperature display between °C and °F.

10.7 Using the camera for other end devices

To use the camera with other end devices, you must log in with the same
username + password as your user account.

10.8 Access to the user account via the web portal (PC)

It is possible to access your user account via the web portal.
You will have received a link to the web portal automatically via e-mail after
setting up the camera.
Note
The transmission image and the timeline can only be displayed via the web portal.
Other functions/settings options (such as the intercom function) are not available.

11. Useful information about the baby monitor

• If you operate the parent unit with the battery, this minimises electrosmog from
electrical and magnetic alternating fields.
• You can increase the range of the baby monitor by positioning the camera as
high up as possible near a door or window and ensuring that the battery is not
too weak.
• Other radio waves may possibly interfere with the transmission of the baby
monitor. Therefore, do not position the baby monitor near devices such as
microwaves, WLAN, etc.
• The following other factors can interfere with the baby monitor's transmission
or shorten its range: furniture, walls, houses, trees, environmental factors (such
as fog, rain).

12. Maintenance and cleaning

The service life of the camera and the parent unit depend on careful handling.
IMPORTANT
• Remove the battery from the parent unit if the Video Baby Monitor is not in use
for an extended period.
• You will get the maximum capacity from your battery if you run down the
battery at least once every six months. To do this, disconnect the parent unit
from the mains and run the battery down through normal use. Then fully
charge the battery up again.
15