Settings Menu - Inanny NM288 Manuel D'utilisation

8.5 Settings menu

You can adjust the following settings in the menu of the parent unit:
zoom function,
camera, alternating camera image and power-saving mode.
• To access the settings menu, switch the parent unit on and press
the ( ) button. The following settings menu appears at the bottom of
the camera screen:
You can navigate through the menu using the (
Zoom function
The parent unit has a zoom function to increase the size of the transmission
image. To activate the zoom function, proceed as follows:
• Use the up/down direction arrows (
require (1x or 2x).
• Confirm using the ( OK ) button.
Lullabies
Via the parent unit, you can activate one of five lullabies that will then be
played over the camera. To activate one of the lullabies, proceed as follows:
• Use the left/right direction arrows (
• Use the up/down direction arrows (
(1, 2, 3, 4 or 5).
• Confirm using the ( OK ) button.
Alarm
You can set an alarm on the parent unit - this will sound on the parent unit after 2,
4 or 6 hours, as you choose. To activate an alarm, proceed as follows:
• Use the left/right direction arrows (
• Use the up/down direction arrows (
which you wish the alarm to sound.
• Confirm using the ( OK ) button.
lullabies, alarm, temperature unit,
) and (
/ ) to select the zoom function you
/ ) to select the menu item
/ ) to select the lullaby of your choice
/ ) to select the menu item
/ ) to select the time period after
9
add/delete/view
) buttons.
.
.