Operating The Camera Via The App; Switching On The Camera; Adding Another Camera; Removing A Camera - Inanny NM288 Manuel D'utilisation

10. Operating the camera via the app

10.1 Switching on the camera

IMPORTANT
Only use the mains part plug included in delivery.
• Connect the small end of the "Baby" mains part plug to the camera.
• Connect the other end of the mains part plug to the socket.
• Slide the ON/OFF switch on the side to "ON". The function light starts to glow
blue. (Push the ON/OFF switch downloads to switch off the camera.)
• Open the "iNanny Monitor" app on your smartphone/tablet or the web portal
on your PC.
• Log into your account.
• When you have correctly set up your camera (see Chapter 7), the transmission
image appears on the display.

10.2 Adding another camera

It is possible to connect up to 4 cameras with one user account:
• When you see the current transmission image, tap the iNanny Monitor logo on
the top left. You are taken to the camera menu.
• Now tap "Add camera" on the bottom left.
• Follow the instructions in the app. As soon as you have successfully logged in,
the transmission image of the attached camera appears automatically.

10.3 Removing a camera

To remove a camera from your user account again, proceed as follows:
• Tap the settings symbol (
remove.
• Tap on "Camera details".
• Tap "Remove camera" and confirm.
Note
In doing so, all events on this camera are irrevocably deleted.

10.4 Account settings / signing out

In the account settings you can, amongst other things, change your password,
view your app version or log out.
1. When you see the current transmission image, tap the iNanny Monitor logo on
the top left. You are taken to the camera menu.
2. Now tap "Account" on the top right.
3. In order to change your password, tap "Change password" and follow the
instructions. If you would like to log out of your account, tap "Log out" and
confirm.
) in the camera menu of the camera you wish to
13