View Camera - Inanny NM288 Manuel D'utilisation

Temperature unit
You can set the device to display the temperature in degrees Celsius (°C) or
degrees Fahrenheit (°F).
• Use the left/right direction arrows (
• Use the up/down direction arrows (
temperature.
• Confirm using the ( OK ) button.
Add camera
You can connect one parent unit with up to four cameras.
To add a camera to the parent unit, proceed as follows:
• Use the left/right direction arrows (
• Use the up/down direction arrows (
• Confirm using the ( OK ) button. 1,2,3,4 appears on the screen.
• Use the up/down direction arrows (
with the ( OK ) button.
a camera.
• Now hold down the PAIR button on the rear of the camera until an acoustic
signal is heard and the transmission image from the camera that has been
added appears on the screen.
Note
• Additional cameras are available in stores under item number 952.64.
Delete camera
If you wish to delete the connection to a camera, proceed as follows:
• Use the left/right direction arrows (
• Use the up/down direction arrows (
• Confirm using the ( OK ) button. 1,2,3,4 appears on the screen.
• Use the up/down direction arrows (
camera that you wish to delete.
• Confirm using the ( OK ) button.

View camera

If you wish to select the transmission image from a camera, proceed as follows:
• Use the left/right direction arrows (
• Use the up/down direction arrows (
• Confirm using the ( OK ) button. 1,2,3,4 appears on the screen.
• Use the up/down direction arrows (
camera that you wish to view.
• Confirm using the ( OK ) button.
/ ) to select the menu item
/
/ ) to select the menu item
/ ) to select the menu item
/ ) to select a number and confirm
appears on the screen and the unit searches for
/ ) to select the menu item
/ ) to select the menu item
/
/ ) to select the menu item
/ ) to select the menu item
/
10
) to select the required unit of
) to select the number of the
) to select the number of the
.
.
.
.
.
.
.