Installing The Receiver - König SAS-TRANS40 Mode D'emploi

Installing the receiver:

1. Connect the receiver's AV OUTPUT with the AV cable
to the input of a monitor or TV.
2. Fix the antenna to the antenna connector.
3. Connect the plug of the 7.5 V/300 mA, AC/DC
adapter to the DC power input and a 230 V wall
outlet.
4. Select the desired channel on both the camera and
the receiver. For optimum performance, it could
be necessary to point the transmitter and receiver
to each other in an imaginary straight line. A few
centimeters could already be enough to improve
the sound and picture quality. If the reception is
perfect, no adjustments are necessary.
5. Turn on the TV or monitor to watch the images of
the camera.
Option: connect a recording device for recording images to the REC output
Specifications:
Camera:
Operating frequency:
Image chip:
Channels:
Antenna:
Power:
Dimensions:
Weight:
Receiver:
Operating frequency:
Channels:
Output:
Antenna:
Power:
Dimensions:
Weight:
5.8 GHz
1/4" CMOS
4 with PLL frequency synthesizer
Omni directional
9 V DC/400 mA
90 x 63 x 65 mm
230 g
5.8 GHz
4 with PLL frequency synthesizer
2x 3.5 mm
Omni directional
7.5 V DC/300 mA
90 x 74 x 20 mm
110 g
5
ENGLISH