Functions
Hygrometry
Usually, the digital display shows the current humidity rate of
the room. The desired humidity level is adjustable through
the button available on the control panel or the remote
control.
Every push on this button increases the mist rate by 5%. When
the desired level reaches 90%, a new push sets a continuous
humidification, regardless of the humidity rate.
Humidification power
Clevair has 3 steam level (Low - Medium - High). When the
humidification power button is pushed, the amount of mist
increases.
Caution : while using the unit at maximum output, it can
happen that the steam falls back and creates condensation
around the unit which could be wrongly identified as a leak.
In order to avoid that, reduce the output level and/or place
the humidifier near a heating source, on a furniture more
than one meter height.
Low
Warm mist mode
his method of humidification heats the water up to 40/45°C
then cools it down in order to avoid any burning risks. The
steam is then softer and better distributed in the air. When
the warm steam function is not activated, the humidifier
works by cold mist mode.
Caution : do not run Clevair with the warm mist mode
continuously on for more than 6 hours, or it could damage
the unit.
Ionizer
Ions have biological properties that
differ according to their polarity. It is
nowadays clear that the negative ions
Medium
have an undeniable beneficial effect
on living organisms. The ionization of
oxygen is comparable to an immediate
Témoin visuel
High
Témoin visuel
12