Bestron AAF509 Mode D'emploi page 24

OPERATION - general
This appliance is only intended for
domestic use, not for professional
use.
1. Operating panel
2. Housing
3. Cord and plug
4. Frying basket
5. Release button
6. Grip
7. Grip slot
8. Tray
9. Power indicator light (green)
10. Timer dial
11. Heating-up indicator light (red)
12. Temperature dial
OPERATION - Prior to the first use
1. Remove the appliance from the packaging.
2. Clean the appliance thoroughly to remove any manufacturing residues (see "Cleaning and maintenance").
OPERATION - Overheating safeguard
The hot air fryer comes with an overheating safeguard installed. The safeguard is activated once the
temperature reaches its threshold. If this happens, you need to cool down the appliance through the following
steps:
1. Shut down the appliance by turning both the temperature dial and timer dial all the way to the left. Take
the plug from the socket.
2. Give the appliance ample time to cool down.
OPERATION - use
This multi-faceted appliance can not only be used as a hot air fryer but as an oven as well, so with its simple
settings you can easily and endlessly vary. The baking time for oven dishes is often much shorter as well,
and pre-heating only takes two to three minutes.
1. Place the hot appliance on a stable, horizontal, flat surface.
2. Pull the tray by the grip from the appliance and place it on a stable, horizontal, flat surface. Slide the
transparent safety plate above the release button forward. Press the release button and take the frying
basket from the tray.
Do not press the release button when taking the tray from the appliance. See the figure on the next page.
5
6
7 4
11
9
12
10
3
24
Instruction manual
8
1
2