Abicor Binzel WH Mode D'emploi page 36

3 Product Description
Weight
Adaptable torch necks
Pull Motor
Power supply
Continuous nominal current
Gear transmission
Tab. 5 Changeable body
1When ordering, the wire feed unit must be specified
Standard length L (m)
Coolant connection
Cooling unit power
Air-blast hose
Control line
Weight/meter
Tab. 6
ROBO hose assembly
3.2 Abbreviations
MIG
MAG
Voltage rating
ROBO WH-....
ROBO WH-....D
WH
WHPP
TCP
Tab. 7 Abbreviations
EN - 8
WH 241D, WH 242D, WH 455D, WH 650, WH 652D (TS),
1
1.00, 1.20, 1.50, 2.00,
Metal Inert Gas
Metal Active Gas
Classification of the insulation resistance, voltage strength and protection type
Designates the torch neck
Designates the torch neck with replaceable tip adaptor
Designates the standard changeable body
Designates the changeable body in the push-pull design
Tool Center Point
WH
0,65 kg
Special WH
24 VDC or 42 VDC
0,44 A
17, 1:1 or 15, 3:1
WH
2.25, 3.00
Connector nipple NW 5
min. 800 W
G 3/8" (spigot nut)
10-wire
approx. 0.7 kg
WH / WHPP
WHPP
1,2 kg
WHPP
2.00, 3.00, 4.00
BAL.0014 • 2019-01-16