Petsafe SportDOG SBC-8 Manuel D'utilisation page 7

FOLLOW THESE STEPS TO CHANGE THE BATTERY:
1. Remove both screws located on either side of the
Contact Points with included 3/32 Hex Key (1A).
2. Remove the Battery Lid by pushing on one side of the
collar strap (1B). Removing the collar strap entirely
from the unit can make the process easier, but is not
required.
3. Remove the current battery (1C).
4. Install a 4L R44 battery aligned with the battery icon
printed on the inside of the unit.
5. Replace the Battery Lid.
6. Reinstall the screws. Do not over-tighten the screws.
NOTE: Replacement 4L R44 batteries can be found at
many retailers. A 3/32 Hex Key was provided with the
original product; however, a replacement kit can be
purchased by contacting SportDOG® Customer Care if
needed.
1A
1B
1C
SPORTDOG.COM 7