Caring For Your Machine; Cleaning The Machine; Lubrication Points - Brother PQ1500S Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Caring for Your Machine

Cleaning the Machine

Note
Make sure power is off before
cleaning sewing machine.
1 Turn machine off.
2 Remove foot.
3 Remove needle plate.
4 Clean out dust and thread
scraps.
✽ Thread scraps can be swept out
through the bobbin door.
5 When the area under the needle
plate is cleaned out, oil hook of
bobbin case with sewing ma-
chine oil.
✽ Use a cloth to clean the machine
of any excess oil.
6 Attach needle plate and foot.
20

Lubrication Points

G When using the sewing machine
✽ Use a cloth to wipe the machine
I Keep Your Sewing Machine Clean
I Precautions
Sewing Speed
(maximum)
Stitch Length
(pitch)
Stroke of
Needle
Stroke of
Thread
Take-Up Lever
Hook
Foot Height
every day, apply a few drops of
oil to each location indicated
twice a month.
clean of any oil spilled near the
lubrication points.
Please use a soft, dry cloth to wipe off light dirt and
dust. If sewing machine is very dirty, wipe with a cloth
soaked in warm water, or in warm water containing a
neutral detergent. Then wipe off any detergent residue,
and wipe off water with a dry cloth.
Please keep sewing machine away from heat sources
such as irons and space heaters. Do not use chemicals
like benzine or thinner to clean your machine. When
machine is not in use, please keep machine out of di-
rect sunlight.
Item
Specification
1,500 stitches per minute
0 – 7 mm
34.1 mm
64.7 mm
Foot Lift
One
6 mm
Two
9 mm
Knee control
Over 10 mm
Item
Specification
Height of feed dog
0.7 mm 1.1 mm
Height of
3 mm – 3.5 mm
lower needle
Needles that
HLX5#9 – #18
may be used
SCHMETZ 130/705H #65 – #110
439 mm × 178 mm
Bed dimensions
Total weight
11 kg
Sewing Light
120V model: 120V/15W
Parts code: X53061-050
220-240V model: 240V/15W
Parts code: 205336-050
595 mm × 285 mm
Sewing area

Publicité

Chapitres

Table des Matières
loading

Table des Matières