SilverCrest SLE 320 A2 Mode D'emploi page 44

♦ Pull the water tank
located in the lid of the water tank
♦ Then insert the stopper into the outlet aperture for the water tank (see fig. 6).
Fig. 5
♦ Replace the water tank
♦ Set up the appliance such that the end of the hose is positioned over a
drain. The open end of the hose must be positioned lower than the appli-
ance's outlet (i.e. the hose must run downwards).
♦ Switch on the appliance as usual and select a programme.
♦ If you wish to drain into the water tank
pull off the hose
with the garden hose.
♦ Screw the closure back onto the outlet
♦ Remove the stopper from the outlet for the water tank and replace it into the
lid of the water tank.
SLE 320 A2
out of the appliance and remove the stopper which is
5
(see fig. 5).
5
5
Fig. 6
in the appliance.
5
or unscrew the EU garden hose adapter
25
again, switch off the appliance,
5
.
14
GB │ IE
together
26
│
41 ■