Cleaning And Changing The Filter - SilverCrest SLE 320 A2 Mode D'emploi

Cleaning and changing the filter
The performance of the appliance also depends upon how clean the filter is.
■ The plastic filter
■ The carbon filter
months.
NOTE
► You can purchase new carbon filters in almost all shops selling household
goods. The carbon filter mats just need to be cut to size.
♦ Switch the appliance off and remove the mains plug.
♦ Remove the water tank
♦ To remove the air inlet grille
air inlet grille
♦ Remove the air inlet grille
♦ To remove the plastic filter
plastic filter
♦ Now, remove the plastic filter
ance by pulling it downwards.
♦ The carbon filter
♦ Start by removing the plastic filter
fully out from under the retaining tabs in the plastic frame.
♦ Now remove the carbon filter
♦ Wash down both filters with lukewarm water.
♦ Allow both filters to dry completely before re-inserting the filter in the
appliance.
♦ To insert, follow the reverse sequence.
SLE 320 A2
9 should be washed every 2 weeks.
should be cleaned every 2 weeks and changed every 6
10
5 from the appliance.
8 , three plastic lugs located at the base of the
8 must be pressed upwards slightly to allow release.
8 in a downwards motion.
, two plastic lugs located at the base of the
9
must be pressed downwards slightly to allow release.
9
including the plastic frames from the appli-
9
is also located behind the plastic filter
10
.
10
from the plastic frame by lifting it care-
9
9
8
GB │ IE
9 .
10
│
43 ■