Operation And Function - La Sommeliere VIP265V MULTIZONE Mode D'emploi

EN

Operation and function

Electronic control
The electronic control ensures that the
temperatures set at the top and at the
bot- tom of the appliance are maintained.
This is achieved by means of an
advanced control of the refrigeration
system, the heating ele- ment. The set
temperature will be stored in the event of
power failure.
The electronic control has the following
functions:
● On/off switch
● Light switch
● Temperature setting
● Temperature indication
● Alarm for too high and too low
temperatures
Temperature indication
The display shows the set temperatures.
The upper digits of the display indicate the
set temperature at the top of the
appliance, and the lower digits of the
display indicate the set temperature at the
bottom of the appliance.
Temperature setting
The thermostat is equipped with a child
lock device. This device is activated by
pushing the "up and down" buttons
simultaneously. After approx. 3 seconds
"Pof" flashes in the display. Then the
actual temperatures are shown as usual.
In addition, the set tem- peratures can
be shown by pushing SET1 and SET2,
respectively.
The child lock device is cancelled by
push- ing the "up and down" buttons
simultane- ously. After approx. 3 seconds
"Pon" flashes in the display, and the
temperature can be set.
Temperature setting at the
top of the appliance
Push SET1. Then the temperature at the
top of the appliance can be adjusted up
and down by means of the "up and down"
but- tons. The temperature can be
adjusted from 17 to 19°C,
16
fig. 8