GB
Installation and start-up
Placement.
For safety and operational reasons, the ap-
pliance must not be installed outdoors.
The appliance should be placed on a level
surface in a dry, well ventilated room (max.
75% relative air humidity). Do not use a
frame or similar.
Never place the appliance close to sources
of heat such as cookers or radiators, and
avoid placing it in direct sunlight.
Ambient temperature.
The climate class is stated on the
nameplate (see page 3 and page 12). This
specifies the optimum ambient temperature.
Wine coolers with winter position, however,
function at ambient temperatures as low as
5ºC.
Climate class
Optimum room tem-
perature
SN
+10 ºC to +32 ºC
N
+16 ºC to +32 ºC
ST
+16 ºC to +38 ºC
T
+16 ºC to +43 ºC
Ventilation.
It is important that the appliance be well
ventilated and that air can circulate unhin-
dered above, below and around it.
The figurs (fig 2) illustrate how the neces-
sary air circulation around the appliance
can be ensured.
The appliance can be installed as a free-
standing unit against a wall, built into a
kitchen element, or lined up with other ap-
pliances (figs 1)
6
fig. 1