Valve Adapter; Universal Adapter; Ball Needle - Ferm CRM1049 Traduction De La Notice Originale

Average pressure
Object Pressure (psi)
Soccerball
Basketball
Volleyball
Lawn-tractor tyre
Bicycle tyre
Check the service-manual of your car for
the correct tyre pressure of your car.
The manometer is not calibrated! After
inflating tires always check the tire
pressure with a calibrated device, for
example at a petrol station.
Risk of injury! Do not pump any objects
up to more than the intended pressure.
They could burst and cause injury and/or
material damage.
using the adapters for inflating other items
Fig A + B
The air gun comes with several adapter types for
inflating all kinds of objects. These adapters can
be connected directly to the air coupler (6d). To
connect, press the clamp on the coupler (6d) and
attach the adapter you want to use.

8. Valve adapter

The valve adapter (8) facilitates easy inflation of
bicycle tires. And works well with 'Sclaverand'
valves, race valves and universal 'Dunlop' valves.
Push the adapter onto the valve and inflate as
described above.

9. universal adapter

The universal adapter (9) facilitates easy inflation
of air mattresses, swimming bands etc. Push the
adapter onto the valve and inflate as described
above.

10. Ball needle

The ball needle (10) can be used to inflate balls.
Push the needle into a ball valve and inflate the
ball as described above.
Pressure (bar)
13 0.8
9 0.6
5 0.3
20 1.3
75 5
4. MAInTEnAnCE
Make sure that the plug is removed from
the mains when carrying out
maintenance work on the motor.
The machine has been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning. Before interfering in any way whatsoever
with the compressor, please make sure that:
• T he switch button is in the "0" position and the
power plug is removed from the power socket
Malfunction
Should the machine fail to function correctly, a
number of possible causes and the appropriate
solutions are given below:
The compressor will not start
• I f the compressor is difficult to start, check:
• w hether the voltage of the mains corre-
sponds to that on the specification plate.
• w hether electrical extension cables are
being used with a faulty core or length.
• w hether the operating environment is too
cold (below 0°C).
• w hether there is electricity supply (plug
properly connected).
Repairs and servicing should only be
carried out by a qualified technician or
service firm.
Cleaning
Regularly clean the machine housing with a
soft cloth, preferably after each use. Keep the
ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth
moistened with soapy water. Never use solvents
such as petrol, alcohol, ammonia water, etc.
These solvents may damage the plastic parts.
faults
Should a fault occur, e.g. after wear of a part,
please contact the service address on the
warranty card. In the back of this manual you find
an exploded view showing the parts that can be
ordered.
7