Information And Malfunction Signals On The Display; Settings And Special Functions; Customization And Language Settings - Fhiaba 1T Série Mode D'emploi

5. SETTINGS AND SPECIAL FUNCTIONS

> Freezer compartment: from -13° C to -23° C
(from 9° F to -11° F), the default temperature,
which is recommended, is -18° (0° F)
> Refrigerator compartment: from +1° C to +7°
C (from 34° F to 46° F), the default temperature,
which is recommended, is +5° C (41° F).
> Cooler compartment: from -2° C to +2° C (from
28° F to 36° F), the default temperature, which is
recommended, is 0° C (32° F).
Warning
If the "keypad locked" message appear, si-
multaneously press the keys Menu
Up/Down (Down) for 3 seconds.
Note
The displayed temperature may vary
slightly with respect to the set tempera-
ture if the doors are continuously opened
or insertion of room temperature food or
large quantities of food.
It takes 6 to 12 hours to reach the select-
ed temperature.
4.3 Information and malfunction
signals on the display
An integrated control system provides informa-
tion through luminous signals or text messages
shown on the display.
The information signal is always displayed with a
fixed text message, while a malfunction signal is
shown with blinking text.
The acoustic signal that accompanies some mal-
function signals can be deactivated by pressing
the Alarm key on the main control panel.
The list of malfunction signals is located in the
back of this manual.
5.1 Customization and Language
Settings
Note
To prevent an inadvertent change to the
and settings the keypad is automatically
locked after a certain period of time.
To re-activate the Menu function, press si-
multaneously the Menu button
Down button
or just press the Menu
3 seconds.
The key lock can be disabled through the
specific function in the Settings menu.
It is possible to customized the functions of your
Fhiaba to adapt it to diverse usage needs, reset-
ting the main parameters (Settings) or activating
special functions (Functions).
Functions are visualized on the main display by
pressing the Menu button
The Up/Down buttons permit scrolling the avail-
able functions, which can be selected by press-
ing the Enter button
current functioning status.
Using the Up/Down buttons , it is also possible
to scroll through the selected function, activating
or deactivating by pressing the Enter button
Once the function is confirmed, the display will
automatically visualize the main menu to select
other functions.
At any time it is possible to return to the previous
selection through
the Menu button
The language of the messages appearing on the
display can be changed by operating as follows:
Enter the Menu by pressing the Menu button
select Settings via the Up/Down buttons
confirm via Enter
Then select the Language function and the de-
sired language.
and the
for at least three seconds
button again for
.
. The display visualizes the
.
.
.
and