Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Manual
200
1/2" ISO or 1/2 NPT
Oil Probe:
Oil probe 12 mm
Application:
32
(1.26")
(7.87")
Working range:
Accuracy:
Response time τ
Pressure range: 0.01...20bar
Measurand:
Calibration:
Cleaning of humidity and temperature sensors from oil residue:
1) Remove filter cap carefully, do not touch the sensors
2) Emerge the measuring head in N-HEPTAN and swirl for
3) Remove excess liquid and allow to air dry for approx. 30 minutes.
4) Screw on filter cap carefully
Cleaning of the measuring head is recommended before emerging
in other oil and before a calibration.
- HA040204 (1/2 ISO), HA040206 (1/2 NPT)
(0.47")
measurement of moisture in mineral and synthetic oil
0...1 a
/ 0...20000ppm / -40...120°C
w
±0.02a
(0...0.9a
w
±0.2°C
/ ±0.36°F
±0.5°C
/ ±0.9°F
: ≤ 10 min (in still oil)
90
sensor 1: temperature [°C/°F]
sensor 2: water activity a
one point calibration (pages 44, 45)
two point calibration (page 46)
approx. 30 seconds
OMNIPORT 20 english
), ± 0.03a
(0.9...1a
w
w
(20°C
),
/ 68°F
(-40 resp. 120°C
/ -40 resp. 248°F
(0.15...300psi)
[ ],
w
water content x [ppm]
(-40...248°F)
)
w
)
page 59
Publicité
Table des Matières
