Ieee1394B Driver For Macintosh; Installation Of The Ieee1394B Driver - Panasonic AJ-PCD20 Mode D'emploi

IEEE1394b Driver for Macintosh

This driver is for the P2 card on this unit.

Installation of the IEEE1394b driver

1
Insert the installation CD.
2
Double-click the Macintosh folder on the
CD.
3
Double-click the AJ-PCD20 folder.
4
Double-click "P2Drive Install.dmg" in the
AJ-PCD20 folder.
5
Double-click "P2Drive Install.pkg".
6
When driver installation starts, follow the
instructions on the installation screen.
<Notes>
By installing this driver, it is possible to connect
to this unit to the Macintosh using IEEE1394b
(Firewire 800) to transfer data at a higher rate.
The P2 card must be formatted using other P2
devices.
When the P2 card is removed or the
IEEE1394b cable is disconnected, drag the
icon for the P2 card to Trash and confirm that
the P2 card icon disappears before executing
removal or disconnection.
Reinsert the P2 card if the P2 card icon is not
displayed.
E-14