Safety Information; Symbols Used In The Instructions; Symbols On The Appliance; General Notes On Safety - Parkside PNTS 1500 B3 Mode D'emploi D'origine

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GB

Safety information

Symbols used in the instruc-
tions
Hazard symbols with in-
formation on prevention of
personal injury and property
damage.
Precaution symbol with information
on prevention of harm / damage.
Notice symbol with information on
how to handle the device properly.

Symbols on the appliance

Electrical machines must not be dis-
posed of with household refuse.
Switching between additional ap-
pliance + vacuum cleaner
Max. load on appliance socket
Device socket for power tools

General notes on safety

Caution! When using power tools,
observe the following basic safety
measures for the prevention of
electric shocks and the risk of injury
and fire:
To avoid accidents and injuries:
Never leave a machine which is ready
for operation unattended at the work-
place.
People and animals must not be vacu-
umed with the machine.
34
Do not vacuum any hot, incandescent,
flammable, explosive materials, or
those which endanger health. This in-
cludes hot ashes, petrol, solvents, acids
or caustic solutions. Personal injury
could occur.
Nozzles and suction tubes must not
reach head level whilst in use. Personal
injury could occur.
To avoid accidents and injuries from
electric shocks:
Ensure that the mains cable is not
damaged by being pulled over sharp
edges, by jamming, or by pulling on
the cable.
Before each use, check the power sup-
ply lead and the extension cable for
damage and ageing. Do not use the
equipment if the cable is damaged or
worn. Danger of electric shock hazard.
If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent
of the same or a similarly qualified per-
son in order to prevent hazards.
Switch the machine off and disconnect
the mains plug:
- when the machine is not in use,
- before the machine is opened up,
- for all maintenance and cleaning
work,
- if the connecting cable is damaged
or tangled up.
Never use the mains lead to pull the
plug out of the socket or to pull the ap-
pliance. Protect the cable from heat,
oil, and sharp edges.
Make sure that the mains voltage cor-
responds with the information on the
rating plate.
Only plug the appliance into a socket
which is safeguarded by at least 16 A.

Publicité

Table des Matières
loading

Table des Matières