Electronic Card Substitution/Maintenance - LAVAZZA Pininfarina Manuel D'entretien

Rear part maintenance
GB
Electronic card
Substitution/maintenance
Unscrew the two fixing screws of the card-cover.
Lift the card-cover to unhook it from the supports
on the upper side and extract it.
Detach the terminal clamps with the relative
harness from the electronic card as shown in the
figure. Detach the flat cable.
WARNING
The clamp and temperature sensor wire
are fragile and should therefore be
handled with extreme care to avoid
their damage which could affect the
performance of the machine.
Avoid stretching or twisting the connecting
flat cable between the card and
the cover. It may harm the function
of the electronic card.
46