Setting The Sound - Harman JBL DSP4086 Mode D'emploi

AUDIO
SPEAKER OUTPUT CHANNELS
INPUT
1+ 2+ 3+ 4+ 5+ 6+ 7+
REMOTE
1- 2- 3-
4- 5-
INPUT
LEVEL
LO HI HI2

SETTING THE SOUND

Download the tuning software from JBL.com
1. Connect to internet with your Windows PC or laptop and go
to JBL.com and download the Graphic User Interface for the
DSP4086 Amplifier.
2. Complete the software installation setup wizard before you
connect your computer to your JBL DSP Amplifier.
3. Double-click "JBL DSP software" from its saved location.
4. Double-click "USB driver" and click install
NOTE: Make sure to allow it to make changes to your computer if
your anti-virus software requests it.
5. Double-click "setup.exe".
NOTE: Make sure to allow it to make changes to your computer if
your anti-virus software requests it.
JBL DSP Amplifier DSP4086
POWER
8+ REM OUT GND 12V REM IN
PC
PRT
6- 7- 8-
GND 12V
PWR
TURN-ON GND 12V
MODE
REM DC AUDIO
6. Click "Next" in the JBL DSP Software Setup Wizard.
7. Select preferred installation folder, or click "next" to choose
the default location.
8. Click "Next" to confirm installation. Again, make sure that your
anti-virus protection allows installation to be completed.
9. Sit back and wait while software installation completes...
10. Installation Complete! Close setup wizard and continue to
next section. You should see this icon on your computer
screen (please note to icon is JBL orange).
EN EN
4