Promise Technology SATA300 TX4302 Guide De Démarrage Rapide page 3

SATA300 TX4302 Task List
• Step 1: Unpack the SATA300 TX4302 Card, below
• Step 2: Install the SATA300 TX4302 Card (page 4)
• Step 3: Install the Disk Drives (page 5)
• Step 4: Install Drivers (page 6)
• Step 5: Install PDCM (page 7)
Step 1: Unpack the SATA300 TX4302 Card
When you receive the SATA300 TX4302 card, the package should contain the
items listed below:
• SATA300 TX4302 Serial ATA Controller card
• Quick Start Guide
• Two 65cm internal SATA drive cables
• Two 1.5m external SATA drive cables
• Low-profile mounting bracket
• CD with drivers and SATA300 TX4302 User Manual
If ANY of the contents are missing or appear to be damaged, please contact your
dealer or distributor immediately.
Before installing the adapter into an existing system, backup any
important or useful data. Failure to follow this accepted PC
practice could result in data loss.
The SATA300 TX4302 Serial ATA Controller cards, like other parts
of your system, are subject to damage by static electricity. Be sure
that you're properly grounded (Promise recommends that you
wear an anti-static strap or touch a grounded object) and that you
unplug your system before installing the SATA300 TX4302.
The SATA300 TX4302 Controller is a PCI Plug-n-Play (PnP)
devices. No changes are necessary in the Motherboard CMOS
Setup for resources or drive types in most applications.
Step 1: Unpack the SATA300 TX4302 Card
Warning
Warning
Note
3