Bresser Biolux ICD 20x Mode D'emploi page 9

compartment cover (11) and remove
the cover.
Place the batteries in the compartment
so that the flat minus poles (-) press
against the spring terminal and the
plus poles (+) are touching the flat
contact sheets (12).
Put on the cover (11) and fix it with the
4 screws (10). Turn the microscope
over again. Place the eyepieces back
on. You can not turn on the light (4)
with the on/off switch (8) on the base
of the microscope.
TIPS on cleaning
Remove the device from it's energy
source before cleaning (remove
batteries).
Clean the exterior of device with a
dry cloth. Do not use cleaning fluids
so as to avoid causing damage to
electronic components.
Protect the device from dust and
moisture. Store the device in the bag
supplied or in its original packaging.
Batteries should be removed from
the device if it is not going to be used
for a long period of time.
Clean the lens (objective
eyepiece) only with the cloth supplied
or some other soft lint-free cloth (e.g.
micro-fibre). Do not use excessive
pressure - this may scratch the lens.
Dampen the cleaning cloth with a
spectacle cleaning fluid and use it on
very dirty lenses.
and
GB
9