Publicité
Les langues disponibles
Les langues disponibles
en
Warning: When teaching-in a finger print it is important that the finger is
drawn at a uniform speed and in a straight line over the sensor. Please
follow the instructions on the display. Only if the finger can be saved with
an optimum quality it will be saved.
2. Opening with the finger scan:
Press the On/enter key
Now Code/fingers will appear on the display
Now draw the saved finger over the sensor
Now the message Please turn the knob will appear on the display
3. Deleting a finger:
Press the On/enter key
Now Code/fingers will appear on the display
Press the Function key
Now Code change menu will appear on the display
By twice pressing key 2 you will reach the Administrator menu
Press the On/enter key
Admin setting create user will appear on the display
By twice pressing key 2 you will reach the Admin setting delete menu
Press the On/enter key
Here you will be asked to enter the admin code (default setting
123456)
Here you will have to select the user by pressing the either key 1 or 2
Press the On/enter key
Delete data by pressing On key! will appear on the display
Press the On/enter key
Data record deleted will appear on the display
By pressing the On/enter key further users can then be deleted. By
pressing the Function key you will be able to return through the menu
levels back to the top to the code input.
Warning: Compared to the TSE 3004 Wireless operating instructions,
the Create code + E-key menu is replaced by the Create finger scan
menu. If a code and/or an E-key is also to be allocated to a user, the log-
ging-on procedure is as described in the TSE 3004 Wireless operating
instructions via the Admin setting create user menu.
4. Fault messages
The fault messages on the display when teaching-in a finger or
opening the lock are given below:
Fault messages
Too fast! Please repeat.
Too slanted! Please repeat.
Too short! Please repeat.
Position centrally and repeat!
7
Correction of the cause
Please draw the finger more slowly
over the sensor
Please draw the finger in a straight
line over the sensor
Draw the finger over the sensor in
such a way that more of the
finger surface can be read
Position your finger centrally
above the sensor
Publicité
