Signature SRB4001A X Série Instructions D'utilisation page 43

• Flow rate is dependent on how far the lever is
pushed back:
Fully back = full flow
Gently back = trickle
• As the level of water in your cup/glass rises, gently
reduce the amount of pressure on the lever to
avoid overflow.
Notes: Push the water dispenser lever with a rigid cup.
If you are using a plastic disposable cup, then push
the lever with your fingers from behind the cup.
Clean the water tank
• Remove the water tank by pulling out the fixed
handle.
• Take off the cap I. Clean the tank with warm and
clean water.
• Install the water tank and push back the fixed
handle.
• To prevent possible leakage, ensure that any parts
removed during cleaning are refitted correctly in
their original locations.
Notes: The water tank and dispenser components are
not dishwasher-proof.
Drip tray
• Water dripping from the dispenser while in use,
accumulates in the drip tray.
• Remove the drip board. Clean the board and tray
with a clean and dry cloth.
• Put the drip board back.
-41-