What To Do If - Becker Centronic VarioControl VC470-II Notice De Montage Et D'utilisation

Malfunction
Drive is not running.
The VC470-II does
not execute manual
drive commands.
The VC470-II
does not execute
automatic drive com-
mands.
Venetian blind tilts
delayed in the lower
end position.
The curtain retracts
without a manual
or automatic travel
command.
Drive is running in
the wrong direction.
What to do if...?
Cause
Faulty connection.
Transmitter has not
been programmed in the
VC470-II.
1. Transmitter has
been programmed in
the VC470-II.
2. Sliding switch of the
transmitter is set to
manual .
The Venetian blind has
been adjusted to the
lower end position twice
within one second via the
DOWN button.
Radio contact between
the sensor and the receiv-
er is defective.
Incorrect direction.
Solution
Check connection.
Programme transmitter.
not 1. Programme
ter.
2. Set the sliding switch of
the transmitter to auto
.
1. Delete tilt position.
2. Set intermediate posi-
tion.
1. Check the radio con-
tact between the sen-
sor and the receiver.
2. You can extend the
curtain for one hour in
deadman mode.
Use the direction switch
to correct the running
direction.
transmit-
de
en
fr
nl
29