Novy 2141 Mode D'emploi page 17

Functions of the Electronic Clock Programmer
Warning function: This function generates a
warning tone at a specified time.
Cooking time: This function allows to
programme the oven to cook for a specified
time, after which it will switch itself off.
End of cooking time: This function allows to
establish the exact hour, after which the oven
will switch itself off.
Duration and automatic stop: This function is
used to control the duration and the time at
which the oven will turn itself off. This function
allows the oven
automatically.
Warning function
1 Press the MODE button until the signal next
to the symbol begins to flash.
2 Choose the time when you want the alarm to
sound, pressing the "+" or "–" buttons.
3 Subsequently, the light will remain on
indicating that the alarm is programmed.
4 At the end of the programmed time, an
alarm will sound and the light will begin to
flash.
5 Press any button to turn off the alarm and
the screen shows the current time again.
Programming the cooking time
1 Press the MODE button until the indicator
next to the symbol begins to flash.
2 Select the length of time, pressing the "+"
or "–" buttons.
3 Subsequently, the indicator that was
flashing will light, indicating that the oven
will switch itself off automatically.
4 The clock will then show the current time.
5 Select a temperature and cooking function.
6 When the set time has elapsed, the oven
will disconnect, an alarm will sound and the
indicator will begin to flash.
7 Press any button to switch off the alarm,
reconnecting the oven.
8 Set the controls in the position
off the oven.
to start and stop
to switch
Programming the end of cooking time for the
oven
1 Press the MODE button until the indicator
next to the symbol begins to flash.
2 Select the time that cooking is to finish,
pressing the "+" or "–" buttons.
3 Subsequently, the indicator that was
flashing is lit, indicating that the oven will
switch itself off automatically.
4 The clock will then show the current time.
5 Select a temperature and a cooking
function.
6 When the programmed time is reached, the
oven will disconnect, an alarm will sound
and the indicator will begin to flash.
7 Press any button to switch off the alarm and
the oven will reconnect.
8 Set the controls to the position
off the oven.
This function may be used even though you are
already cooking in your oven. To do so, follow
the instructions given except Nº 5.
Programming the duration and automatic
stop
1 Press the MODE button until the indicator
next to the symbol begins to flash.
2 Select the length of cooking time pressing
the "+" or "–" buttons.
3 Subsequently, the indicator that was
flashing will remain lit.
4 Press the mode button until the indicator
next to the symbol begins to flash.
5 Select the time that cooking should finish
pressing the "+" or "–" buttons.
6 Subsequently, the indicator that was
flashing will remain lit.
7 Select a function and cooking temperature.
8 The oven will remain disconnected with the
indicators next to the
lit. Your oven is programmed.
9 When the time to begin cooking is reached,
the oven will switch itself on and will
continue cooking during the programmed
time.
to switch
and symbols
17