Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Hardware contents pre-installed as noted in instructions
that follow.
REF#
1
1/4"*15mm Tr u ss Head Screw
2
1/4"*8mm Truss Head Screw
1/4"*8mm Stage Screw
3
5/32"*10mm Countersunk Head
4
Screw
5/32"*10mm Truss Head Screw
5
Preparation
Before beginning assembly, make sure all parts are present.
Compare parts with package contents list and diagram above. If
any part is missing or damaged, do not attempt to assemble the
product. Contact customer service for replacements parts.
Estimated Assembly Time: 20 minutes
Note: The right and left sides of the grill are designated as if
you are facing the front of the grill.
12
INSTALLATION INSTRUCTIONS
Freestanding Outdoor Grill Installations
Description
Swivel Caster Assembly
1. Unpack bottom panel and 2 casters. Note that there are 2
casters pre-assembled to the bottom panel. Check and make
sure the 2 pre-assembled casters have not loosened during
transit. Remove 8 pre-assembled screws from the bottom panel
and use those screws to secure the 2 casters. The locking
caster is to be located at the rear of the bottom panel.
QTY
12pcs
2pcs
4pcs
4pcs
2pcs
Cart Assembly
1. Unpack both side panels and the rear panels. Loosen the 8
screws which are pre-assembled to the bottom panel and the 6
pre-assembled screws on the side panels.
2. Secure the left side panel by clipping the open hole onto the
screws which is pre-assembled to the bottom panel and tighten
the 3 screws.
Publicité
Table des Matières
