1. Intended use
The intended use of this power tool is the
sanding of large areas of drywalls as a
preparation before painting or wallpapering
using suitable abrasive sheets.
This power tool is neither suited for the
preparation of small areas, corners and edges,
nor for the removal of wallpaper and the
grinding of ceilings and wet grinding.
Do not use the power tool for cutting or
roughing or polishing. Do not use it together
with wire brushes. Do not treat asbestos-
containing materials with this power tool.
This power tool is solely intended for private
use. Do not use the power tool for any other
purpose than for the intended one. Any other
use beyond the intended use is improper.
For any resulting damage or injury, the user/
operator is held liable, not the manufacturer.
2. Technical data
Nominal voltage:
Nominal frequency:
Power consumption:
Nominal speed (oscillation rate) n:
Spindle size:
Grinding disc diameter:
Abrasive paper diameter:
Protection class:
Weight.:
Sound levels
Sound pressure level L
Sound power level L
WA
Uncertainty K:
Hand-arm vibration
When grinding with abrasive sheets a
Uncertainty K:
The specified hand-arm vibration value is based
on grinding with an abrasive sheet. Different
230 V~
50 Hz
710 W
700-1700 min
M14
Ø 210 mm
Ø 214 mm
II /
approximately 3.5 kg
:
80 dB(A)
pA
:
91 dB(A)
3 dB(A)
:
h,DS
= 2.38 m/s
1.5 m/s
applications may result in different values.
The noise and vibration values were determined
according to EN 60745-1 and EN 60745-2-3.
The specified vibration value was measured on
the basis of a standard test method and can be
used to compare any kind of power tools.
The specified vibration value can also be used
for the initial evaluation of exposure.
Warning!
Depending on how you use the
power tool, the actual vibration
values may deviate from the specified values!
Take measures to protect yourself against
vibrations!
Make sure to take into account the entire
work process, i.e. also times when the power
tool is operated without load or switched off!
Appropriate measures include the regular
maintenance and care of the power tool
and its attachments, keeping your hands
warm, regular breaks and well planned work
processes!
3. Signs and symbols
The following symbols and signs are provided
-1
on the nameplate, the power tool and in this
instruction manual. Before using the power
tool, you should familiarise yourself with their
meaning.
Read the operating instructions.
Wear hearing protection!
2
2
Wear a dust mask!
GB
17