Tectro TS 1225 Manuel D'installation page 68

CONTENTS
1. Safety precautions
2. Parts supplied
2.1 Parts supplied for the TSCS 12xx models
2.2 Parts supplied for the TS 12xx models.
3. Activities prior to the installation of the air conditioner for the TSCS 12xx models.
4. Activities prior to the installation of the air conditioner for the TS 12xx models.
5. Positioning of the indoor and outdoor unit.
5.1 Positioning of the indoor unit for the TS 12xx and TSCS 12xx models.
5.2 Positioning of the outdoor unit for the TS 12xx and TSCS 12xx
models.
6. Possible options for installing the piping from the inside unit to the outside unit.
7. Mounting the installation plate and drilling holes for piping.
7.1 Mounting the installation plate of the indoor unit.
7.2 Drilling holes for piping, condensed water hose and power cable.
8. Connecting the refrigerant piping.
8.1 Connecting and disconnecting the refrigerant piping for the TSCS 12xx models.
8.2 Connecting the refrigerant piping for the TS 12xx models.
9. Connecting the condensed water drain for the TSCS 12xx and TS 12xx
models.
9.1 Connecting the condensed water drain of the indoor unit.
9.2 Connecting the condensed water drain of the outdoor unit.
10. Electrical installation.
11. Connecting the power cables.
11.1 Connecting the power cables for the TSCS 12xx models.
11.2 Connecting the power cables for the TS 12xx models.
12. Vacuuming the cooling system of the TS 12xx models.
13. Checking leak tightness of the cooling system for the TSCS 12xx and TS 12xx models
models.
14. Adding refrigerant with pipe lengths over 5 meter.
15. Test run after installation for the TS 12xx and TSCS 12xx models.
4
68