Attaching The Dust Cloth - Medion Micromaxx MD 15328 Mode D'emploi

NOTE!
Switch off the device before charging it.
 Attach the mains adapter to the mains connection on the top of the vacuum
cleaner.
 Insert the plug into the mains socket.
The device is now being charged; the LED ring flashes blue.
As soon as the battery block has been fully charged, the LED ring will be perma-
nently lit blue.
The LED ring flashes red as soon as the battery charge is too weak.
 Charge the battery block before using the vacuum cleaner again.
NOTE!
If the performance of the battery block drops significantly, please con-
tact the Medion Service Centre.

6.4. Attaching the dust cloth

 Remove the dust cloth holder by carefully pulling it off the bottom of the device
using both hands.
 Place the dust cloth holder onto a dust cloth and fold the protruding sections of
the cloth over the holder.
 Insert the protruding sections of the cloth into the clamping slots provided for
this purpose.
 Place the locking tabs on the dust cloth holder into the openings provided for
this purpose on the device and firmly press down until it clicks into place.
DE
FR
NL
EN
59 / 66