Loading The Dishwasher - Brandt DWE350 Notice D'utilisation

Loading the dishwasher

In order to obtain good cleaning results, be
sure to remove any large food residues before
switching on the machine. Any burnt or stuck-
on residues must be removed beforehand.
The model dish-washer has two racks for 12
place-settings, or 162 items (figures 10-11), to
standard DIN 44990.Always point the inside of
the crockery downwards. Ensure that no item
conceals another and that nothing obstructs
the spraying facility. After switching on, check
that the spraying arms can move freely. No
item should overlap the baskets.
Lower basket
(Fig. 8 - 9 - 11)
Place the dishes so that water may circulate
freely and spray all the utensils. (Avoid
attaching and piling dishes up).
This basket is especially intended to hold:
plates, cutlery, dishes, frying pans, saucepans.
Put large-sized plates and frying pans on
the side.
Avoid mixing plates and soup dishes. You
should preferably place same-sized plates
together. Place soup dishes at the back, in
the high pin area.
Upper basket
(Fig. 10 - 12)
This basket is particularly intended to hold
glasses, cups, ramekins, small salad bowls,
bowls, saucers etc...
Place glasses so that they do not touch and tip
them sufficiently so that they do not retain any
water. Place the hollow end of glasses, cups
and bowls facing downwards. Arrange the
dishes methodologically to gain space (rows of
glass, cups, and bowls).
You can if you wish unclip the saucer rack to
gain space.
The upper basket should be adjusted to the
HIGH position when loading large plates in the
lower basket. The setting can be execute
basket in charge.
6
Make sure nothing obstructs the rotation of
the lifting arm (saucepan handles, cutlery or
large dishes).
The cutlery trays slide and can be put
anywhere on the lower basket. You can adjust
them according to the dishes you wash.
Removable grids are available if you wish to
load cutlery in an orderly fashion.
For optimum washing, you can use these
separation grids.
Cutlery : (Fig. 13)
• Place handles downwards.
• Separate silverware from other metals using
the separating grill.
• It is preferable to place small spoons in the
separating grills.
Setting the HIGH POSITION
Slowly lift the basket until you hear a
click on each side.
Setting the LOW POSITION
Lift the basket completely on both sides
(click) and then follow it downwards.
Make sure that the two runners are
adjusted to the same level.
GB