Firmware Updates - GROLAB USERBOT HW01 Manuel D'installation

UPDATES

Firmware Updates

Keep in mind that some so ware updates
may require that you update the firmware of
your GroLab modules.
All updates provide crucial improvements
that ensure op mal system performance.
However, as UserBot firmware is compiled
and applied by the user, it is required to keep
monitoring the UserBot code repository on
GitHub for any code updates. In case some
code updates are submi ed, the user must
apply those changes to their code, re-compi-
le and re-upload it to the Arduino. It is also
necessary to reapply the factory se ngs.
3
EN
ES
FR
PT
IT
30