D User Manual - brennenstuhl 1171820 Manuel Utilisateur

060120 BA_Solar Butterfly.qxp

D User Manual

Solar LED Wall Light with Sensor
Please read and follow all instructions to operate.
Save this manual for future reference.
INSTALLATION
1. Please use the card to measure hole position correctly and drill 3 holes of Ø 6mm.
2. Fix 3 expansion plugs into the holes.
3. Fix 3 screws into the explansion plugs with a spare space.
4. Insert the notch to the lower screw and fasten the whole lamp well.
5. Press the back button to adjust to the demanded working mode.
NOTICE
1. This is a solar powered lamp, please install it in a location where can get enough sunshine.
2. Please note the lighting time depends on sunshine duration & weather.
3. The lamp will light up automatically at dusk.
4. Built-in intelligent IC is with over-charge, over-discharge and over-voltage protection.
22.12.20 12:25 Seite 5
5