Help Menu; Picture Settings; Connect Wlan - Me VDV-907 Mode D'emploi

the first ring tone stored on the SD card. If no
files are stored on the SD card or if no SD card
is inserted, the symbol is grey and the inter-
nally stored ringtones can be selected auto-
matically via the number field. The volume of
the ring tone can be adjusted via the "+" and
"-" keys.
NOTE: Audio data in wave or mp3 format can
be stored on the microSD card.
It is possible to assign an individual ring tone
to each connected outdoor unit. In this way,
it is possible to distinguish where the ringing
was from the ringing tone. The name of the
outdoor unit for which the ring tone is
currently set is shown in the upper part of the
menu. Use the arrow keys above and below
to switch between the outdoor units.

Help menu

Touch the Help button. Here you will find our
contact information as well as the QR code
for connecting to the app.

Picture Settings

Touch the picture settings icon to adjust the
brightness, colour saturation and contrast of
the live picture displayed.

Connect WLAN

Tap the WLAN symbol to connect to a nearby
WLAN. In the following menu, all nearby
WLAN access points are displayed. Tap on
your WLAN and enter the WLAN key. Con-
firm the key by tapping the Enter key.
Wait a short time. If you mistyped the WLAN
key, the indoor unit indicates that the
connection is not successful and jumps back
to the input screen for the WLAN key and
you can check your entry and change it if
necessary.
If the indoor unit indicates that the connec-
tion is successful, the name of your WLAN is
displayed in green at the top.
NOTE: It is not possible to set the network
manually, DHCP is always used.
To access the intercom with your smart-
phone, you need the Vistasmart or Aivisi
app. Call up the website https://www.vistas-
mart.de with your smartphone and select the
VDV 907 indoor unit.
44
ENGLISH | VDV-907
GB