Activate Screen; Advanced Functions; Light; Arrow Symbol Right And Left - Me VDV-907 Mode D'emploi

VDV-907 | ENGLISH

Activate screen

Touching the Talk button in standby activates
the screen and the voice connection, and the
live picture of the outdoor unit is
also displayed.

ADVANCED FUNCTIONS

(TOUCH buttons on the screen when ringing
or the talk button has been pressed)

Light

Using this button, a receiver from the CUVEO
series can be used to switch a light, for exam-
ple. For more information, see "Teaching the
GB
CUVEO receiver".

Arrow symbol Right and Left

If a second outdoor unit or an additional
camera is connected in parallel, the two but-
tons can be used to switch to the next or pre-
vious outdoor unit/camera.

Alarm symbol

If this button is touched during an active call,
an alarm signal sounds at the outdoor unit.
Touching the button again or ending the call
deactivates the alarm tone.
Volume + and -
Touching the "+" button increases the speech
volume, touching the "-" button decreases
the speech volume.
NOTE: This setting is only temporary and is
reset to the basic volume after the call is
ended (see Basic volume setting).

Mute key

If the mute button is pressed during the call,
the microphone of the indoor unit is deacti-
vated and the visitor can no longer hear you.
To be able to speak with the visitor again,
touch the button once more. If no mute
button is displayed, it has been deactivated
in the settings menu.

Camera button

If a microSD card for photos is inserted in the
indoor unit, a photo can be saved via this
button at any time while the picture is active.
To do this, simply tap this symbol.
41