Setting The Language; Setting The Basic Volume (B2); Setting The Time And Date; Basic Settings - Me VDV-907 Mode D'emploi

VDV-907 | ENGLISH

Setting the language

Touch the flag symbol to access the language
selection menu. Touch the desired language
there and then save the setting by touching
the save symbol. The heading of this menu is
immediately displayed in the selected lan-
guage if the saving was successful. Use the
back arrow to return to the settings menu.

Setting the basic volume (B2)

Touch the mouth symbol to set the basic
volume. The + button increases the volume,
the - button decreases it. The filled dots show
you how high the volume is set. The volume
is saved automatically. Use the back arrow to
return to the settings menu.
GB

Setting the time and date

Touch the clock/calendar symbol to enter the
settings menu for date and time. Touch the
field you want to set (the active field turns
blue). You can then use the arrows on the
right to change the value. You can set the
time and date automatically, which requires a
WLAN connection with Internet access, or
manually. The UTC (Universal Time, Coordi-
nated) setting should be "0" in manual clock
mode.
NOTE: If the time is set to automatic and the
UTC is set to 0, the correct time zone is
determined automatically. If a different UTC
is set, it will always be used. In this case, it is
necessary to set the daylight saving time
manually. After you have set the date and
time, tap the save symbol at the bottom
right. You can then exit the menu using the
back arrow.

Basic settings

In the basic settings you can determine which
control icons should be visible on the main
screen and which functions should be active.
Tap the info button to the right of each set-
ting to get a description. This settings menu
is divided into two pages. You can switch bet-
ween the pages using the buttons with the
arrow (right or left).
NOTE: Changes must be saved on each page
by tapping the save icon.

Setting the melody

Touch the note symbol to enter the ringtone
setting menu. If an SD card with tones stored
on it is inserted, the SD card symbol is high-
lighted in blue and tapping on the "1" plays
43