Atag One zone Guide D'installation Rapide page 17

WARNING:
After confirming the procedure, your device (smartphone, PC, tablet ...) will automatically
disconnect from the Remote GW Thermo network; an error page may appear in the browser
window that can be ignored.
6.2 Configuration unsuccessful or requiring update
If the configuration is not successful, ATAG One zone will display the "
procedures described previously.
The network configuration must be repeated every time you make a change to the internet
network in your home (change of password, operator, router).
LEGEND:
"AP" One zone in Access Point mode
" " No connection to the service or thermostat not configured correctly
" " Thermostat connected to the router or internet but not to the Cloud
" " Thermostat configured correctly and connected to the internet and Cloud
" " Software update in progress
6.3 Time scheduling
Setting a schedule or clock program cannot be done from the ATAG One zone, but is done from
either the ATAG zone app or the my.atag.zone portal.
" icon. Repeat the
EN / 17