Important - Atag One zone Guide D'installation Rapide

IMPORTANT!

When running the procedures described in this booklet, it is best to
leave the default setting DHCP = ON unchanged.
The setting DHCP=OFF must be selected for networks configured in static IP mode.
6.1 Guided procedure for TELECONTROL (TC)
1. Open the app, login to your account and follow the guided procedure. The app for iOS will
proceed with the HomeKit connection procedure and afterwards return to the app automati-
cally.
2. The product is properly connected to internet and registered if:
- the display indicates a successful connection to the router and internet
- the app displays a message confirming that the product has been registered.
- the display shows the home screen with the "
3. You can now control your ATAG zone system remotely using the smartphone app or on the
web portal my.atag.zone.
IMPORTANT:
You can use ATAG zone with several smart devices at once: simply use the same credentials
to log in. The app includes an option for registering more than one ATAG One zone with a
single user account.
• VIA APP: open the ATAG zone app, without logging in, and follow the
guided procedure.
• VIA BROWSER: open the web browser, enter 192.168.1.1 in the address bar,
select the wifi network and enter the password.
We recommend leaving the default settings unchanged
16 / EN
ANDROID
" icon steady
• The iOS operating system will
automatically suggest the next steps
required to connect the product to
the internet
iOS