AMIX AFF04 Manuel Utilisateur page 33

INSTALLATION GUIDE
Display AFF04 (or AFF08) with display AFF16 (display in dB)

CAP65 sensor
 Connect the AFF16 and the AFF04 (or AFF08) with a RJ45 cable.
 Connect the CAP65 sensor to the AFF16 display.
 To power the unit, connect the AFF16 display to the supplied power supply.
12V power supply
On the AFF16 display:
The GPO1 threshold corresponds to the threshold of position B of the AFF04/AFF08 display

The GPO2 threshold corresponds to the threshold of position C of the AFF04/AFF08 display

On the rear panel of the AFF16 the leds GPO1 and GPO2 visualize the state of GPO1 and GPO2.
Attention : the GPO1 threshold must be lower than the GPO2 threshold.
For setting AFF16, please refer to its manual.
AMIX
AFF16
CAP65
AFF04 or AFF08
RJ45 cable
AFF04 / AFF08 - Rear panel
13
12V power supply
AFF16 - rear panel
Figurative display
Next