You can restrict access to the temperature adjustment .
In the Basic mode or Prog mode menus .
Access Parameters
- The temperature will be restricted to a maximum of 23°C .
- A warning will appear if the temperature is increased with a request for confirmation (the
compulsive overheating function) .
- Access to the Expert mode menu is secured using a PIN code .
Deactivation is possible by resetting the appliance (refer to the Expert mode menu) .
Our appliances are compatible with different shedding systems . However, you must not
use mains disconnection shedding as this system is incompatible with our appliances . Sharp
unplanned and repeated electricity supply disconnections may cause premature wear and
damage to electronic boards which are not covered by the manufacturer's warranty .
The screen switches to standby during shedding periods .
The appliance then returns to its initial operating mode .
Restrictions
, select "Restrict" .
Shedding
35