Restrictions; Load-Shedding; Declaration Of Conformity - Atlantic AGILIA Notice D'utilisation Et D'installation

You can restrict access to the temperature setting and modes.
In menus in Basic mode, Prog mode and Auto mode.
Go to Settings, Restrictions, choose «Contr. access and then choose «Restricted».
- The temperature will be restrained at 23 ° C maximum;
- An alert will appear if the temperature is increased with a confirmation request (anti-heat-
up function);
- Access to the Expert Menu is secured by PIN code.
Deactivation is possible by resetting the device. (see the Expert Menu).
Our devices are compatible with different load-shedding systems. However, you should not
use load-shedding by cutting off the power supply because this is incompatible with our
devices. Total and repeated power supply cut off may cause premature wear and damage to
electronic cards that are not covered by the manufacturer's warranty. During load-shedding
periods, the screen switches to standby mode.
The unit then returns to its initial operating mode.
Hereby Atlantic Industries declares that the equipment referenced below complies with the
essential requirements of the RED Directive 2014/53/UE.
Description :
Model :
Features :
Radio frequency bands used by the transceiver :
868MHz à 868.6 MHz
868.7 MHz à 869.2 MHz
869.7 MHz à 870 MHz
Maximum radiofrequency output :
Operating temperature : mini -10°C ; maxi +35°C
Wireless Equipment Class2 : may be placed on the market and put into service wit-
hout restrictions.
Radio range : 100 to 300 meters outside, variable depending on the associated equip-
ment (the range can be altered depending on the installation conditions and the electro-
magnetic environment).
Compliance with radio and EMC standards is verified by the notified organism 0081: LCIE
France, Fontenay aux Roses.

Restrictions

Load-shedding

Declaration of conformity

RED DIRECTIVE 2014/53/UE (*)
room heaters with radio card BD1C
RCH-BDC / RCV-BDC
< 25mW
44