Installing The Appliance; Unlocking The Hanging Bracket; Mounting The Hanging Bracket - Atlantic SOKIO Notice D'utilisation

Installing the appliances at altitude causes a rise in the air
outlet temperature of some 10°C per 1000 m in altitude).
Installing a vertical appliance horizontally and vice versa is
prohibited. Using the appliance in a mobile configuration, on feet or
on rollers, in prohibited .

1 - Unlocking the hanging bracket

We recommend leaving the appliance in its protective wedges
and laying it flat, face downwards.
- Use a screwdriver to lift the tab, without deforming the tab.
- Push the bracket downwards to disengage the upper hooks.
- Pivot the hanging bracket.
- Then remove the bracket.

2 - Mounting the hanging bracket

- Place the hanging bracket on the floor against the wall.
- Find the drilling points A. These give the position of the lower
mounting points.
- Raise the hanging bracket, aligning it with drilling point A to
identify the drilling points B. These give the position of the upper
mounting points.
- Drill the four holes and fit wall plugs suited to your wall (e.g.
plasterboard) and the weight of the appliance.
- Position the hanging bracket and tighten down the screws.

INSTALLING THE APPLIANCE

24